UV/LED MNP STARLIGHT 48 Watt Lamp

The STARLIGHT MNP 48 Watt UV/LED Lamp is capable of catalyzing all UV, LED, polyacrylic gel and gel polishes.

It features 30 strategically positioned LEDs and a removable lower mirror-effect tray that allows a complete catalysing of the gel, gel polish and polyacrylic gel, including from below, by reflection of light.

How does the STARLIGHT MNP 48 Watt UV/LED lamp work?

When first used, take the lamp out of its cardboard as well as its protective pouch and the power cable from its cardboard. Pick up the bottom tray of the lamp by pulling it down and remove the blue protective film from the bottom tray, then place the bottom tray back on the lamp.

Connect your lamp to the socket and then to the area.

5 modes of use:

• Detection mode: Insert the hand under the lamp, which lights up automatically. The lamp stays on while the hand is inside and automatically turns off when the hand is removed;
• 24 Watt mode: Press the ON/OFF button and the lamp lights up in 24 Watt mode for 1 minute;
• 5-second mode: Press the 5S button and insert your hand. The lamp goes out after 5 seconds;
• 30-second mode: Press the 30S button and insert your hand. The lamp goes out after 30 seconds;
• 60-second mode: Press the 60S button and insert your hand. The lamp goes out after 60 seconds;

The lamp cleans very easily with the UV Gel Cleanser to remove traces of gel or gel polish. Remove the bottom tray and clean it with the UV Gel Cleanser. If traces persist, you can use a blade to remove them. Be careful, however, not to scratch the bottom tray with your blade. Then disinfect with a sanitizing wipe.

The STARLIGHT 48 Watt MNP UV/LED lamp is guaranteed 2 years parts and manpower.