ÜLKA Handy Nail Dust Collector with Flow E-file Handpiece

ÜLKA Handy + Flow: dust capture and e-file work on one base

Count what currently sits on your nail table: the lamp, the dust collector, the e-file control unit, the handpiece, and the three cables running to the power strip. On a 60 cm deep worktop, very little room is left for bottles, brushes and your client's hand.

The ÜLKA Handy + Flow removes one of those boxes. The Flow handpiece connects directly to the Handy dust collector, which powers and controls it. One unit on the table, one mains cable, and two professional functions instead of one.

What the integration changes

On a standard setup, the e-file comes with its own control unit: a box the size of a pencil case, sitting to one side, wired to the mains on one end and to the handpiece on the other. That box exists purely to power and regulate the motor.

On the Handy + Flow, that function lives inside the dust collector body. You get the box's footprint back, you lose its cable, and you have a single unit to carry when you change stations or head to a training session. The Handy weighs 0.7 kg and measures 24 × 20 × 7.5 cm: it travels in one hand.

Dust capture: 3.5 m/s over a wide intake area

The Handy's intake area measures 16.1 × 13.1 cm and sits directly under the working zone, where dust is created. Air speed reaches 3.5 m/s, capturing particles as they are produced rather than collecting them once they have settled on the table.

This works for both manicure and pedicure: the free-standing format, with no cut-out or fixing, lets you move the unit towards the footrest when the service calls for it.

The Flow handpiece: 35,000 RPM and 3.0 N·cm

The Flow is not a backup handpiece. It reaches 35,000 RPM and delivers 3.0 N·cm of torque at 80 W, the figures expected from a professional e-file. Torque is the number to watch: it determines whether the bit keeps a constant speed when you press into a thick gel layer, or slows down and heats up.

The body weighs 250 g for a length of 146 mm and a diameter of 13.8 to 27.5 mm. It is balanced so the weight sits in the palm rather than at the fingertips, which is what prevents wrist strain over a full day of removals.

Both tools at a glance

Who it is for

• Nail technicians working on a narrow table who need to free up surface.
• Anyone equipping a station in one go who wants a matched set, without having to pick a handpiece separately and check it works with their dust collector.
• Mobile professionals, working from home or renting a cabin, who carry their equipment between stations.
• Training centres, where the number of boxes and cables per station adds up.

If you already own a dust collector and only need a handpiece, see the ÜLKA Flow handpiece on its own. If it is the other way round and your e-file suits you, the Handy is also available separately.

Technical specifications

Handy dust collector

Flow handpiece

Maintenance

1. Every day, dust the filter dry, with a soft brush or an air blower. This is the habit that determines how long the unit lasts.
2. Never use water on the filter medium: moisture opens the fibres and the filter stops holding fine particles.
3. Wipe the grille and the body with a soft cloth, without abrasive products.
4. Replace the filter roughly every 3 months, or sooner if suction drops.
5. Clean the handpiece chuck at the end of each day and check that the bit locks without play.

Filters compatible with the Handy are in our ÜLKA consumables.

Frequently asked questions

What is a dust collector with a built-in e-file?

It is a unit combining a nail dust collector and a professional e-file handpiece. The handpiece draws its power and control from the dust collector, which removes the separate box and frees up worktop space.

Does the Flow replace a real professional e-file?

Yes. It runs at 80 W, reaches 35,000 RPM and delivers 3.0 N·cm of torque, figures of a professional e-file rather than a backup tool.

Is a separate control unit needed?

No. That is the point of the system: the Flow handpiece plugs directly into the Handy, which handles power and speed control.

What is the Handy's suction speed?

It reaches 3.5 m/s at the intake, over a 16.1 × 13.1 cm capture area placed under the working zone.

Is the system suitable for manicure and pedicure?

Yes. It is used for dust capture and e-file work in both cases. The free-standing format lets you move the unit according to the service.

Does it capture dust when removing gel and acrylic?

Yes. Removal with an e-file is precisely the service that produces the most dust, and the intake area sits as close as possible to the filing point.

Is the handpiece comfortable for a full day?

It weighs 250 g and is balanced so the mass sits in the palm. That is what limits wrist fatigue over long services and busy days.

How much table space does it take?

The Handy measures 24 × 20 × 7.5 cm and weighs 0.7 kg. It fits even a narrow station and moves in one hand.

What warranty covers the set?

The Handy dust collector carries a 5-year warranty. After-sales service is handled in France by NC Beauty Pro, exclusive ÜLKA distributor.

Why buy it from NC Beauty Pro?

Because NC Beauty Pro is the exclusive ÜLKA distributor for France. You receive a genuine unit, with an enforceable warranty, after-sales service handled in France and spare parts available from the catalogue.

To compare with the rest of the range before choosing, see our ÜLKA dust collectors and our ÜLKA e-files.