ÜLKA Premium 2.0 Nail Dust Collector: 4.4 m/s, the Highest Air Speed in the Range
Filing dust does not scatter at random: it leaves the edge of the nail, a few centimetres from the grille. The whole point of a professional dust collector is to catch it where it is generated, before it settles across the worktop and into the air of the room. That is exactly what the ÜLKA Premium 2.0 is built for — the 2026 generation of the brand's best-selling tabletop unit.
With a maximum air speed of 4.4 m/s, it becomes the fastest ÜLKA collector in the catalogue, from just 48 W. Redesigned grille, housing lowered to 10.6 cm, HEPA filtration and a 5-year warranty.
Human Engineering: a unit designed around the gesture
ÜLKA designed this generation on the Human Engineering principle: starting from the nail tech's real workflow rather than from a spec sheet. Three questions shaped the unit. Where is dust actually generated? In what position does a client's hand stay comfortable for forty minutes? And how much room is genuinely free on a nail table already holding a lamp, an e-file and bottles?
All three answers are visible on the product: a widened grille aimed at the filing zone, a low housing, and a compact 26.7 × 26.7 cm square footprint.
4.4 m/s: catching dust at the source
Air speed is the figure that matters on a nail dust collector. It determines how far the unit can still pull a particle in. The higher it is, the better capture holds up when the hand drifts slightly away from the grille — which happens constantly in real work.
The Premium 2.0 reaches 4.4 m/s. Here is where it sits in the range:
| Model |
Power |
Air speed |
Noise level |
Weight |
| ÜLKA Premium 2.0 |
48 W |
4.4 m/s |
69 dB |
2 kg |
| ÜLKA Premium (1st generation) |
52 W |
3 m/s |
55 dB |
2.15 kg |
| ÜLKA Tiny |
43 W |
3.7 m/s |
58 dB |
0.70 kg |
| ÜLKA Aero tabletop |
39 W |
3.7 m/s |
70 dB |
1.20 kg |
| ÜLKA Nano |
58 W |
3.5 m/s |
85 dB |
1.20 kg |
| ÜLKA Tornado (built-in) |
60 W |
3.2 m/s |
85 dB |
1.57 kg |
The table also shows an engineering point: the first generation needed 52 W to reach 3 m/s, while the 2.0 achieves 4.4 m/s on 48 W. More suction from fewer watts is the sign of reworked airflow, not simply a bigger motor.
A redesigned grille with a large suction area
The Premium 2.0 grille has been entirely redrawn to offer a large suction area and to direct airflow toward the exact point where dust forms. In practice this mainly changes how forgiving the unit is: you no longer have to keep pulling your client's hand back to the centre of the grille for capture to stay effective.
The gain shows on the dustiest services — gel or acrylic removal with an e-file, infills, filing long extensions — precisely where the previous generation reached its limits.
10.6 cm high: the hand stays flat
A tall collector forces the client to lift her wrist for the whole appointment. Over a full set, that position creates tension and micro-movements, and therefore less precise work for you.
The Premium 2.0 housing is only 10.6 cm tall. The hand rests almost flat, the position holds without effort, and the unit fits under a UV lamp without getting in the way. Its square 26.7 × 26.7 cm footprint and 2 kg weight give it a stable base that will not slide when you press down.
48 W for everyday use
The Premium 2.0 is sized to run all day, not occasionally. Its 48 W deliver consistent performance from the first appointment to the last, without the heat build-up and loss of airflow seen on underpowered units.
It runs on 220 V / 50 Hz as well as 110 V, at a noise level of 69 dB.
Who is this model for?
- Nail technicians doing back-to-back removals and infills with an e-file, who want the most effective capture in the range.
- Nail artists working on long extensions, where dust is heavy and thrown far.
- Professionals with a fixed workstation, in a salon, a studio or at home.
- Anyone who puts workstation ergonomics and client comfort first on long appointments.
If your priority is quiet rather than raw airflow, look at the first-generation Premium at 55 dB, among our ÜLKA Premium dust collectors. For an under-worktop installation, see the ÜLKA Tornado.
Technical specifications
| Installation type |
Tabletop dust collector |
| Maximum power |
48 W |
| Maximum air speed |
4.4 m/s |
| Noise level |
69 dB |
| Supply voltage |
220 V / 50 Hz — 110 V |
| Filtration |
HEPA filter |
| Grille |
Redesigned, large suction area |
| Weight |
2 kg |
| Dimensions |
26.7 × 26.7 × 10.6 cm |
| Design year |
2026 |
| Warranty |
5 years |
Care and consumables
A nail dust collector is maintained with two habits, and they decide whether the unit still pulls hard after three years or is tired within six months:
- Every day, dust the filter dry with a soft brush or air blower. In busy salon use this daily habit matters more than anything else.
- Never use water on HEPA media: moisture opens the fibres and the filter stops trapping fine particles.
- Wipe the grille and housing with a soft cloth. Abrasive products permanently mark the finish.
- Replace the filter roughly every 3 months, or sooner if suction weakens or cleaning no longer restores it.
Filters and wear parts are available in our ÜLKA consumables. As the Premium 2.0 is a new generation with a redesigned grille, please contact us before ordering a replacement filter or grille: we will confirm the exact reference for your unit.
Frequently asked questions
What is a nail dust collector and why is it needed?
It is a device designed to capture the dust produced during filing and product removal. It keeps the work surface clean and makes the appointment more comfortable for both the nail tech and the client.
How does a professional nail dust collector work?
It creates a directed airflow that captures dust right in the working area. The Premium 2.0 delivers an air speed of up to 4.4 m/s, and its filter traps the captured particles.
How do you choose a nail dust collector for professional use?
Look at air speed, grille area, filtration, noise level, footprint and housing ergonomics. For everyday professional use, add reliability, warranty length and access to service support.
What air speed should a nail dust collector have?
Air speed determines how effectively dust is captured in the working area. The Premium 2.0 reaches 4.4 m/s, the highest figure in the ÜLKA range, ahead of the Tiny and the ÜLKA Aero at 3.7 m/s.
What matters more, power or air speed?
Watts indicate power consumption, not capture efficiency. What counts is the combination of air speed, the design and size of the suction area, filtration and ergonomics. The Premium 2.0 illustrates this: 48 W for 4.4 m/s, where the previous generation used 52 W for 3 m/s.
How does it differ from the first-generation Premium?
The 2.0 pulls considerably harder — 4.4 m/s against 3 m/s — with a redesigned grille and a lower 10.6 cm housing. In exchange it is louder: 69 dB against 55 dB. If quiet comes first in your treatment room, the first generation remains the right choice; if you want the most effective capture, take the 2.0. Both are listed among our ÜLKA Premium dust collectors.
Is the Premium 2.0 suitable for everyday salon use?
Yes. It is built for regular professional use: 48 W, 4.4 m/s, a durable housing and a 5-year warranty backed by official ÜLKA service.
Does it capture dust effectively when using an e-file?
Yes. With an e-file, dust is generated directly in the filing area. The redesigned grille offers a large suction area and 4.4 m/s captures the particles as they form.
Is it suitable for removing gel polish, gel and other nail materials?
Yes. The collector is used during any service that generates dust while filing or removing artificial materials. The Premium 2.0 captures that dust right in the working area.
Why does a dust collector need a filter?
The filter traps the particles carried by the airflow. Without it, dust would simply be blown back out of the exhaust. Regular filter care maintains performance and keeps the workstation clean.
How often should the filter be cleaned?
In professional use, clean it daily, especially with a high client volume. Regular cleaning prevents build-up and maintains suction efficiency.
How often should the filter be replaced?
Allow around 3 months depending on how intensively the unit is used, and sooner if its condition deteriorates or cleaning is no longer enough. Filters are in our ÜLKA consumables.
How should the unit be maintained day to day?
Regularly clear dust from the housing and grille, and keep an eye on the filter. Clean and replace it according to the manufacturer's recommendations. That is what keeps performance consistent over time.
What does the 5-year warranty cover?
The Premium 2.0 is covered for 5 years, a rare span for this kind of equipment. After-sales service is handled in France by NC Beauty Pro, exclusive distributor of ÜLKA, with spare parts available in the catalogue.
Why buy the ÜLKA Premium 2.0 from NC Beauty Pro?
Because NC Beauty Pro is the exclusive ÜLKA distributor in France. You buy a genuine unit, covered for 5 years, with after-sales service and spare parts handled locally — not a parallel import with no recourse.
To compare the whole range before choosing, browse our ÜLKA Premium dust collectors and the ÜLKA Aero.
