Hot sterilizer with Steril Tre quartz microbeads

Tips for use:

1. Pour the microbeads, supplied with the appliance, into the metal bowl.
2. Plug the device into the area.
3. Turn on the switch.
4. Set the thermostat to the maximum temperature for 45 minutes. Then on 16 to keep the microbeads at optimum temperature.
5. Ensure that the instruments to be sterilized are clean, so as not to damage the device or instruments. Instruments such as scissors should be placed slightly open.
6. Instruments deposited in the sterilizers must be removed from each other during sterilization. Do not overload the device.
7. Because the device is hot, the instruments are sterilized very quickly (20-30 seconds).
8. After sterilization, remove the instruments with thermal gloves or turn off the unit and wait for it to cool down.

Technical features:

• Power voltage: 220 - 230V - 50/60 Hz
• Power: 100 W
• Weight: 0.870 kg
• Dimensions: mm 180x176x176 h